Announcement

Collapse
No announcement yet.

Actuator Menu

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Actuator Menu

    The "DC motor" option missing from the actuator list - we only have the servo option. Any ideas or suggestions on how to fix?

  • #2

    The actuators and sensors menus are based on the active config file so you need to build that first via the config forms on the motor controller phone.

    Comment


    • #3
      You can install a "dummy" configuration by choosing the "Configure from template" option at the bottom of the config screen, and select the one that most closely resembles your desired hardware. (Or there is an everything option as well).

      Then your Blocks program will have the standard motor and servo devices.

      Comment

      Working...
      X