Announcement

Collapse
No announcement yet.

Init button does not work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • besnikzylka
    replied
    Thanks for the catch. Below is the right link. I have selected the gamepads. The voltage is between 11 and 12.8 volts. Thank youl

    Leave a comment:


  • Philbot
    replied
    Have you selected your gamepads? ie" Pressed START and A on the driver pad.

    Also, is 12V on? Check your voltage on the DS. Anything less than 6V and the motors won't run.

    Leave a comment:


  • 3805Mentor
    replied
    Link just took me to my own drive. I think you need to right click on the file, get shareable link, copy, paste that link here.

    Leave a comment:


  • besnikzylka
    started a topic Init button does not work

    Init button does not work

    Hello everyone,

    Besnik from ISHRMechanicalMustangs, Hannover Germany. I am running into some trouble running a basic teleop mode from Android Studio. The following link shows the problem, when I press init nothing happens. I have attempted to investigate myself but to no avail. Teleop modes do work however when the team uses Block programming. Any help is appreciated.
Working...
X