Announcement

Collapse
No announcement yet.

Position 2 of Center Structure

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Position 2 of Center Structure

    We believe that the latest revision of the Field Setup Manual introduces a discrepancy. Page 19 implies that the correct setup for position 2 is when the long edges of the center field base are parallel to the tile borders and to the long dimension of the ramps. This puts the IR beacon pointing at the 30 cm rolling goal, or about a 60-degree counter-clockwise rotation from position 1.

    The new schematic for "LR15 - Number 2 Sticker Placement" shows a rotation angle that is 45 degrees from position 1. With that rotation, the long edge of the center field base will not be parallel to the tile borders or to the long dimension of the ramps, and the IR beacon will point at the 90 cm rolling goal instead.

    Could you please clarify which rotation is correct?
Working...
X